16 segment driver ic

 · find a 16 segment LED display with 2 separate common cathodes (can't seem to find any) use a 8x8 dot matrix per digit instead (would require 1 MAX per digit) use a 16 bit shift register IC per digit. yesyes Janu, pm # I've decided to go with the 8x8 matrix.  · If you need additional IO lines, a typical “LCD backpack” supplies at most eight additional lines of IO; channel TLC LED Driver Board as mentioned by Majenko would be more elegant than using several backpacks. You might try an approach like the following to see if it works well enough. Use 16 IO lines to pull down 16 segment lines. Automotive Grayscale Segment LCD Driver IC DESCRIPTIONS The S1D is a segment LCD driver IC that can be directly connected to a microcontroller, enabling the display image data transferred from the microcontroller to be displayed on the segment .

The MAX is a compact display driver that interfaces microprocessors to a mix of 7-segment, segment, and segment LED displays through an I 2 C-compatible 2-wire serial interface. The MAX drives up to 16 digits 7-segment, 8 digits segment, 8 digits segment, or discrete LEDs, while functioning from a supply voltage as low as V. Quick-Start: Driving Segment Displays with the MAX Abstract: This article is how-to guide, intended as a quick learning aid for engineers considering using the MAX to drive segment monocolor LEDs. The MAX is a versatile display driver, capable of controlling a mix of discrete, 7-segment, segment, and segment LED displays through a serial interface. The MAX is a compact display driver that interfaces microprocessors to a mix of 7-segment, segment, and segment LED displays through an I2C-compati-ble 2-wire serial interface. The MAX drives up to 16 digits 7-segment, 8 digits segment, 8 digits seg-ment, or discrete LEDs, while functioning from a supply voltage as low as V.

The MAX drives up to 16 digits 7-segment, 8 digits segment, 8 digits seg- ment, or discrete LEDs, while functioning from a supply voltage as low. Display Driver, LCD 16 Digits, 7 Segments, V to V Supply, V to V LED display driver with I/O expander and key scan in 40 pin TQFN package. Seven segment display with dot point and common-anode LED panel. generator. Serial. I/F. V. CC. (+ V). GND. (0 V). Output segments. Current.